LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 483 (Front Suspension (Sedan)) >> 40 Front Suspension >> SUBFRAME >> Diagonal Brace, Removing And Installing >> Removing

Diagonal Brace, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Noise Insulation Panels
GWWA10-11071Courtesy of AUDI OF AMERICA, LLC

-- Place the vehicle on a hoist.

-- Remove the rear noise insulation -2-. Refer to OVERVIEW - NOISE INSULATION .

-- Remove the bolts -1- and -2- and the diagonal brace.

Fig 2: Identifying Clamping Sleeve
GWWA40-10125Courtesy of AUDI OF AMERICA, LLC