LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 483 (Front Suspension (Sedan)) >> 40 Front Suspension >> SUBFRAME >> Diagonal Brace, Removing And Installing >> Installing >> Notes

Diagonal Brace, Removing And Installing: Installing: Notes

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Installation is the reverse of removal, with special attention to the following:

NOTE:

The stamped edge on the diagonal brace near the bolt holes must be on the bolt head side.

Pay attention to the tightening sequence and the pre-tightening specification.

scientia non olet · About LEMON Manuals