Nut Versions for the Control Arm and Guide Control Arm Bracket
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Hex - collar nut -A- M12 wrench 21 mm
Tightening specification: 145 Nm
- Hex - combination nut -B- M12 18 mm
Tightening specifications: 110 Nm
- Hex - combination nut -B- M12 21 mm
Tightening specification: 120 Nm
- Hex - combination nut -B- M14 21 mm
Tightening specification: 140 Nm