Washer Fluid Reservoir Filler Tube, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Alarm Horn, Removal

Courtesy of AUDI OF AMERICA, LLC

Vehicles through 05/2008:

-- Remove the seal -arrow- near the windshield wiper fluid reservoir filler tube.

-- Unclip the plenum chamber cover -3- and remove it.

NOTE:

Ignore items -1 and 2-.

Vehicles from 06/2008:

Fig 2: Identifying Plenum Chamber Cover

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -3-.

-- Remove the clips -2- from the mount and remove the plenum chamber cover -1-.

All vehicles:

Fig 3: Identifying Filler Neck With Filler Tube From Washer Fluid Reservoir And Opening In Body

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -1- and tilt the washer fluid reservoir filler neck back slightly -arrow A-.

-- Remove the filler neck -2- with filler tube from the washer fluid reservoir and the body opening -arrow B-.