Washer Fluid Reservoir Filler Tube, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Filler Neck With Filler Tube To Washer Fluid Reservoir

Courtesy of AUDI OF AMERICA, LLC

Tightening specification. Refer to OVERVIEW - WINDSHIELD WASHER SYSTEM .

Install in reverse order of removal. Note the following:

-- Slide the sealing grommet -2- on the filler neck tube -1- as far as the stop.

The tab must lie in the opening on the filler tube -arrows-.

-- Slide the filler neck into the washer fluid reservoir.

NOTE:

Make sure the O-ring is not crushed when sliding it into the washer fluid reservoir.