Spray Nozzles, Removing And Installing, AUDI RS 4: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Hose Clamps 3094

Courtesy of AUDI OF AMERICA, LLC

-- Remove the headlamp housing. Refer to HEADLAMP, REMOVING AND INSTALLING, HID HEADLAMPS FROM MY 2013 .

-- Clamp off the windshield washer fluid hose -1- with the Hose Clamps - Up To 25mm 3094.

-- Open the cover -7- for the spray nozzle.

Fig 2: Identifying Front Facia Spray Nozzle Cover

Courtesy of AUDI OF AMERICA, LLC

-- Release the spray nozzle -5- by pressing the springs -4 and 6- down using a narrow screwdriver.

-- Remove the spray nozzle from the mount -3- towards the rear -arrow-.

-- Remove the washer fluid hose -2- by pressing the release button -1-.