LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 480 (Wiper/Washer Systems (Sedan)) >> 92 Wiper/Washer Systems >> Headlamp Washer System >> Spray Nozzles, Removing And Installing >> Spray Nozzles, Removing And Installing, AUDI RS 4 >> Installing

Spray Nozzles, Removing And Installing, AUDI RS 4: Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Spray Nozzle Installation
GWWA92-10201Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal. Note the following:

-- The springs -3- and -4- of the spray nozzle -2- are only able to engage audibly when the side guide -1- is seated properly in the mount -5-.

-- Install the headlamp housing. Refer to HEADLAMP, REMOVING AND INSTALLING, HID HEADLAMPS FROM MY 2013 .