Washer jet adjustment, front window (Cabriolet)

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Mark four points on windshield using water-soluble pen.

Fig 1: Identifying Windshield Dimensions

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Adjusting dimension:

Dimension - a - = 3.0 mm
Dimension - b - = 500 mm
Dimension - c - = 450 mm
Dimension - d - = 2.0 mm

NOTE:

The adjustment dimensions are figured from the aluminum edge on the trim.
Locate individual spray jet points using windshield washer aiming tool T10127 with replacement tip 3.25/5A..

NOTE:

If the spray field is uneven or does not adjust to the aforementioned specifications, replace the washer jet (repair measures).