Tire Pressure Monitoring System: Programming tire pressures
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Specified values should also be saved with every tire pressure adaptation, e.g. when vehicle load condition changes, so that Tire Pressure Monitoring System can be as useful as possible. Do this as follows:
- Press Reset button on windshield washer lever.
- Select Tire Pressure Monitoring System.
- Select Save tire pressures.
NOTE:
- Saving of tire pressures must be started after each deliberate change to specified values.