4-cyl. 1.8L
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Remove engine cover → Engine cover: Removing
- Switch ignition off.
- Remove connector - 1 - at spark plugs.
- Push connector - 1 - toward ignition coil, press on catch with hand and remove connector.
- Remove ignition coil from spark plug using Ignition Coil Puller T40039.
- Remove spark plugs using spark plug wrench 3.22 B.
- Install new spark plugs.
NOTE:
- Push ignition coils by hand into intended resources in cylinder head cover.