Service display, resetting

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Follow these steps in sequential order.

Fig 1: Connecting Diagnostic Lead Connector VAS 5051/1 Or VAS 5051/3 At Data Link Connector (DLC)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Connect VAS 5051/5052
Use auxiliary K-lead adapter VAS 6017B
Guided Fault Finding or Guided Functions
Go to - function/component selection

Service work
Combination Processor, reset WIV
Now follow guided program

NOTE:

Please follow guided program function description
WIV = Wartungsintervall - Verlngerung (Maintenance Interval Extension)