Select vehicle system:
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Press "17 - Instrument panel insert" on display - arrow -.
Indicated on display:
Control module identification and the coding will be displayed - arrow -.
- Press the arrow button - 1 - on the screen display.
Indicated on display:
- Press "10 - Adaptation" on display - arrow -.
Indicated on display:
- Press button 9 twice on number block display - arrow -.
Transport mode is activated or deactivated in adaptation channel 99.
- Confirm entry with Q button on display number block.
NOTE:
- "0" Transport mode not active
- "1" Transport mode active
Indicated on display:
- Drag the cursor - arrow - on the display to the left, until 0 is indicated above the scroll bar - 1 -.
- 0 Transport mode not active
- Press the "Save" button - 2 - on display.
Indicated on display:
- Press the "Accept" button - arrow - on display.