Table - Sequence / quantity of brake fluid
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
* Including brake fluid extracted from brake fluid reservoir and quantity from clutch slave cylinder.
- Fit cover caps to brake caliper bleed screws.
- Move filler lever on VAS 52.4 or V.A.G 1869 to position - B - (see operating instructions).
- Take filler hose off adapter.
- Unscrew adapter from brake fluid reservoir.
- Check brake fluid level and correct if necessary.
- Install cap to brake fluid reservoir.
- Check pedal pressure and brake pedal free play. Free play: Max. 1 / 3 of pedal travel