LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Maintenance Procedures - Cabriolet) >> 01 - Maintenance >> Description of work >> Battery: Perform battery load test >> Table:

Battery: Perform battery load test: Table:

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Regarding battery load test:

Because of the high load on the battery during this test (a high current flows) the battery voltage lowers.

If the battery is OK, the voltage only goes down to the minimum voltage specification.

If the battery is malfunctioning or only faintly charged, the battery voltage will drop rapidly to below the displayed minimum voltage.

After the test, this low voltage remains steady over a longer time before the voltage slowly increases.