Battery: Ensure battery cable fits securely
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Check battery terminals on vehicle battery for secure fit, tighten nuts on -terminal -1- and + terminal - 2 - if necessary.
WARNING:
If the battery clamp is not seated securely on the positive terminal, disconnect battery Ground (GND) strap on battery negative terminal first, to prevent possible accidents.
NOTE:
- Observe before disconnecting battery → Note before disconnecting battery.
- Check battery for secure fit, tighten screws - 4 - on securing bracket - 3 - if necessary.