Front windshield wiper blade park position
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.
- Switch windshield wipers on and off and allow to run to end position.
- Check whether wiper blades rest again front window in indicated position.
- Dimension - a - = 24 mm
- Dimension - b - = 44 mm
NOTE:
- Dimensions indicate distance of wiper blades to plenum chamber cowl panel grille on lower window edge.
- If necessary, unscrew wiper arm, align and tighten nuts.
- Activate mist wipe and check adjustment.
| Tightening torque | Nm |
|---|---|
| Wiper arm to wiper shaft | 21 |