Service display, resetting without VAS 5051/5052
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- If reset without VAS 5051 or VAS 5052 , service display is automatically set to fixed interval (15,000 km).
Resetting can be carried out using tester VAS 5051 or VAS 5052 in "Adaptation" function → Service interval display: resetting or adapting .
Service display can also be reset using the following procedure:
- Turn off ignition.
- Press Taste button - 1 - and switch on ignition at the same time.
After releasing button, display shows: "SERVICE IN ????Km" or "SERVICE!".
- Hold down button Taste - 2 - until text is reset to "SERVICE IN ????Km" or "SERVICE!".
- Turn off ignition.