Special tools, testers, and measuring equipment
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.
- VAS 5234 Brake filling and bleeding tool
- V.A.G 1869 Brake filling and bleeding tool with Adapter set V.A.G 1869/4
NOTE:
- Use only new Original VW / Audi brake fluid, see ETKA
WARNING:
- Brake fluid must never come into contact with fluids containing mineral oils (oil, gas, cleaning solutions). Oils containing minerals damage seals and sleeves on brake systems.
- Brake fluid is poisonous. Due to its caustic nature, it must also never be brought into contact with paint.
- Brake fluid is hygroscopic, which means that it absorbs moisture from the air. Always store brake fluid in air-tight containers.
- Wash off brake fluid spillage using plenty of water.
- Observe waste disposal regulations!
Observe operating instructions for VAS 5234 or for V.A.G 1869 !
- Remove brake fluid reservoir cap - 1 -.
WARNING:
- The strainer in the brake fluid reservoir must not be removed.
- Remove brake fluid reservoir plug - arrow -.
- Connect suction hose from VAS 5234 or V.A.G 1869 to tube - 1 - of brake fluid reservoir.
- Extract as much brake fluid as possible using suction hose from VAS 5234 or from V.A.G 1869 or with extractor bottle.
- Disconnect suction hose.
- Install brake fluid reservoir plug.
WARNING:
Do not reuse, (used) extracted brake fluid.
- Install adapter - 1 - to brake fluid reservoir.
- Connect filler hose - 2 - from VAS 5234 or V.A.G 1869 to adapter.