Primary Lock
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- The primary lock is the locking mechanism of an individual crimp contact in the terminal housing.
- If necessary, housing securing mechanisms (secondary locks) must be released or removed using specified tool before releasing the contacts → Secondary Lock .
- The shapes of the primary locks depicted in the following are only a selection which, as an example, should make clear the various functions of the secondary lock.
- Allocation of the correct release tool to the respective locking mechanism → VAS 1978/35 operating instructions.