Fuse carrier for main fuse, removing and installing

WARNING: This page is about a different car, the 2002 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Removing

Remove rubber seal for plenum chamber cover.

Fig 1: Identifying Plenum Chamber Cover & Removing Rubber Seal

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove plenum chamber cover -1- toward front -arrows-.

Fig 2: Identifying Cap, Nut At Electric Cable, And Nut For Carrier Fuse On Positive Post

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Fold cap -2- to the side and remove nut -3- at electric cable.
Remove nut -1- for fuse carrier on positive post.

Installing

Installation is the reverse of removal.

Tightening torques

Component	Nm
Fuse carrier to positive post	6
Electrical wire to fuse box	6