Electronics box driver side, removing and installing
WARNING: This page is about a different car, the 2002 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Removing
- Remove driver's seat.
Refer to 72 - SEAT - FRAMES
- Remove A-pillar trim.
Refer to 70 - INTERIOR TRIM
- Fold back floor carpet.
- Disengage cover for driver's side electronics box -arrows- and fold cover to the right.
- Remove control modules.
NOTE:
Check the exact assignment for driver side electronics box in the current wiring diagram.
Refer to Electrical Wiring Diagrams, Troubleshooting & Component Locations
Installing
Installation is the reverse of removal.