Switch in center console, removing and installing
WARNING: This page is about a different car, the 2002 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Removing
- Disengage storage compartment on both sides -arrow 1- and remove storage compartment from instrument panel toward rear -arrow 2-.
- Position a small, flat screwdriver on switch at top.
- Carefully pry out the respective switch from switch mount -arrows-.
- Unplug harness connector.
Installing
Installation is reverse of removal, paying attention to the following:
- Connect harness connector.
- Press switch into recess in instrument panel and engage.