Footwell light, removing and installing
WARNING: This page is about a different car, the 2002 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Remove footwell lights to replace bulbs.
- Bulb for footwell light: 12 V, 5 W
Removing
- Using a flat screwdriver, press in retaining tab -1- and pry out footwell light -2-.
- Unplug connector -3-.
- Remove bulb from socket on back side of footwell light.
Installing
Installation is reverse order, paying attention to the following:
- Plug in connector.
- Insert footwell light in opening and clip in at opposite side.