Headlight range control module -J431-, removing and installing
WARNING: This page is about a different car, the 2002 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Removing
Location: Behind glove box on instrument panel
- Remove glove box:
Refer to 68 - INTERIOR EQUIPMENT
- Unplug connector -arrow-.
- Remove bolts -1- and -2- and detach headlight range control module.
Installing
Installation is the reverse of removal.
Tightening torque
| Component | Nm | |
| Control module to body | 3 | |