Headlight washer system spray jet inserts, removing and installing

WARNING: This page is about a different car, the 2002 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Removing

Fig 1: Pulling Up On Spray Jet Covers At Bumper And Carefully Disengaging Mounts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Pull up on spray jet covers at bumper and carefully disengage mounts -arrow-.

Fig 2: Unclipping Retaining Clip And Pulling Spray Jet Inserting Upward

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Unclip retaining clip and pull spray jet insert upward -arrows-.

Installing

Installation is the reverse of removal.