Wiper blade rest position, adjusting

WARNING: This page is about a different car, the 2002 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Let wiper motor run to rest position.

Fig 1: Checking Windshield Wiper Blade Tips Position

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Set wiper blades on front windshield and align as follows:

Vehicle type	Dimension a mm	Dimension b mm
Cabriolet	24 + 5	35 + 5

NOTE: The dimensions indicate the gap between the wiper blades to cowl grille of plenum chamber at lower edge of windshield.

Tighten wiper arm securing nut to 21 Nm.
Operate wiper cycle button.
If necessary, realign wiper arms once again and tighten securing nuts.