Spray jets, adjusting
WARNING: This page is about a different car, the 2002 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and equipment
- Windshield washer aiming tool T10127 equipped with 3125/5A replacement tips
NOTE:
The adjustment dimensions indicate the required values for the driving vehicle, i.e. when standing still, the spray jets spray in a slightly offset manner.
- Mark the four points on windshield using a water soluble marker:
- Dimension a = 340 mm
- Dimension b = 500 mm
- Dimension c = 450 mm
- Dimension d = 280 mm
- Set the individual spray jets onto points using adjustment tool.