CD changer, removing and installing: Notes

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools and Equipment

Fig 1: Identifying Special Tools - Radio Removal Tool T10057

Courtesy of VOLKSWAGEN UNITED STATES, INC.

T10057 radio removal tool

Removing

Open glove compartment.

Fig 2: Inserting Two Hooks Of T10057 Radio Removal Tool Into Front Of CD Changer

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Insert two hooks of T10057 radio removal tool into the front of the CD changer.
Pull the CD changer out of its installation slot.
Detach connector.
Pull out the release tool from the CD changer - to do this, press in the locking tabs on the CD changer.

Installing

Plug in the connector.
Slide the CD changer into the installation slot until it engages.
After installation, it is essential that the wiring is checked. Refer to Check wire connection between radio and CD changer .