Mirror selector/adjustment switch, removing and installing

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Mirror Adjustment Switch E43 , Mirror Selector Switch E48 , and Mirror (with fold-away function) Switch E168 (where applicable) are integrated into a single module.

Removing

Remove front door trim → 70 - INTERIOR TRIM .

Fig 1: Identifying Electrical Connection, Mirror Adjustment Switch, And Fasteners

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Disconnect electrical connection - 1 - at mirror adjustment switch - 2 -.
Use small screwdriver to carefully release fasteners - arrows -.
Pull mirror adjustment switch downwards out of door trim.

Installing

Install in reverse order of removal, noting the following:

NOTE:

When installing, ensure symbol trim is inserted before the mirror adjustment switch.
Press mirror adjustment switch into switch mounting until retaining hooks engage.
Install front door trim → 70 - INTERIOR TRIM .