Emergency Flasher Button E229 , removing and installing
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Special tools, testers and auxiliary items required
- Hook 3370
Removing
- Open glove compartment.
- Carefully pull off trim panel - 1 - using hook 3370 as illustrated.
- Carefully lever out Emergency Flasher Button E229 - 1 - from switch mounting - arrows - using a flat screwdriver.
- Disconnect electrical connection.
Installing
Install in reverse order of removal, noting the following:
- Push switch into mounting in instrument panel and ensure it is properly engaged.