Drivers Seat Memory Program Control E97 , removing and installing

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Special tools, testers and auxiliary items required

Fig 1: Identifying Trim Removal Wedge 3409

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Removal wedge 3409

Removing

Fig 2: Removing Switch Using Removal Wedge 3409

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove switch - 1 - using removal wedge 3409 as illustrated.
Disconnect electrical connection.

Fig 3: Identifying Fasteners, Switch, And Mounting

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Use small screwdriver to carefully release fasteners - arrows -.
Remove switch - 1 - from mounting - 2 -.

Installing

Install in reverse order of removal, noting the following:

Press switch into switch mounting until fasteners engage.