Drivers Interior Locking Switch E150 , removing and installing
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Removing
- Remove front door trim → 70 - INTERIOR TRIM .
- Disconnect electrical connection - 2 -.
- Press switch - 1 - out of drivers door trim towards inside of vehicle - arrow -.
Installing
Install in reverse order of removal, noting the following:
- Install front door trim → 70 - INTERIOR TRIM .