Garage Door Opener Control Module J530 - through 10.04, removing and installing

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Switch off all electrical consumers.
Switch ignition off and remove ignition key.

Removing

Remove front bumper cover → 63 BUMPER .

Fig 1: Identifying Bolt And Module For Removal

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove bolt - 2 - and disengage retainer.
Remove module - 1 - from bumper cover.
Disconnect electrical connection.

Installing

Install in reverse order of removal, noting the following:

Install front bumper cover → 63 BUMPER .