Headlamp securing lugs, servicing
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- If headlight securing lugs break due to application of excessive force, it may still be possible to service headlight in a cost effective manner (though headlight housing must not be damaged).
- Different repair sets are available for left and right headlight.
Procedure
- Remove headlamp with broken retaining tab → Headlamps, removing and installing .
- Remove remains of broken lug - 3 - and - 4 - on headlamp housing.
- Attach lug - 2 - from repair kit to edge of headlight housing and secure it with two screws - 1 -.
Tightening torque
| Component | Nm |
| Headlamp to lock carrier | 6 |