LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Electrical Equipment) >> 94 Lights, Switches - Exterior >> Automatic Headlamp Range Control >> On Board Diagnostic (OBD), function

On Board Diagnostic (OBD), function

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

The headlight range control module is controlled by a microprocessor and has On Board Diagnostic (OBD) capability. If malfunctions occur in any of the system components, corresponding DTCs are stored in the Diagnostic Trouble Code (DTC) memory.

Before performing any troubleshooting or inspection, always begin by checking for DTCs using the On Board Diagnostic (OBD) program. DTCs stored in memory are retrieved/checked with VAS 5051/5052 tester in mode "Guided Fault Finding".