Headlamp Range Control Module J431 , removing and installing
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Removing
- Location: at instrument panel carrier behind glove box
- Remove glove box → 68 - INTERIOR EQUIPMENT .
- Disconnect electrical connection - arrow -.
- Remove screws - 1 - and - 2 - and remove module.
Installing
Install in reverse order of removal.
Tightening torque
| Component - fastener | Nm |
| Control module to body - screw | 3 |