Windshield washer spray jets, adjusting
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Special tools, testers and auxiliary items required
- Adjusting tool T10127 fitted with needle 3125/5 A
Adjustment
NOTE:
- The adjustment dimensions indicate the values for a moving vehicle, i.e. the spray from the jets is slightly offset when the vehicle is stationary.
- Use water-soluble pen to mark the four points on windshield:
- Dimension - a - = 250... 275 mm
- Dimension - b - = 465... 490 mm
- Dimension - c - = 270 415 mm
- Dimension - d - = 140... 225 mm
- Align individual washer jets with these points using adjusting tool.