iPod Baseplate R192 , removing and installing
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Trim removal wedge 3409
- Turn off all electrical components.
- Remove ignition key.
Removing
- Open glove box.
- Remove iPod - 1 - from iPod Baseplate R192.
- Using Trim Removal Wedge 3409 , carefully pry iPod Baseplate R192 out of retainer - arrows -.
- Remove iPod Baseplate R192 from glove compartment and disconnect connection.
Installing
- Install in reverse order.