CD Changer R41 , removing and installing: Notes

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.

Special tools, testers and auxiliary items required

Fig 1: Identifying Special Tools - Radio Removal Tool T10057

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Radio removal tool T10057

Turn off all electrical components.
Remove ignition key.

Removing

Open glove box.

Fig 2: Inserting Two Hooks Of T10057 Radio Removal Tool Into Front Of CD Changer

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Insert two clips on Radio Release Tool T10057 in release slits on CD Changer R41 until they engage. Points on grip eyes face outward.
Pull CD Changer R41 out of mounting frame.
Release connectors on CD Changer R41 and remove.
Remove Radio Release Tool T10057 by pushing locking tabs on CD Changer R41 to do so.

Installing

Connect harness connector.
Slide CD Changer R41 into mounting frame until it engages.
Check wiring connection to Radio R (not radio generation II+).