Amplifier R12 , Avant, removing and installing
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.
- Turn off all electrical components.
- Remove ignition key.
Removing
- Open right luggage compartment storage bin.
- Disconnect connector - 1 - on Amplifier R12 - 2 -.
- Remove bolts - arrows - (3 Nm) and remove Amplifier R12 - 2 -.
Installing
- Install in reverse order.