Navigation System Antenna R50 , Sedan, removing and installing

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.

Turn off all electrical components.
Remove ignition key.

Removing

Remove roof end trim → - 70 - INTERIOR TRIM .

Fig 1: Identifying Retaining Clips, Harness Connector, And Cover Navigation System Antenna R50

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Release retaining clips - arrows - and remove cover Navigation System Antenna R50 - 1 -.
Disconnect harness connector - 2 - on Navigation System Antenna R50 - 1 -.

Installing

Install in reverse order.