Navigation/TV Tuner J415 , removing and installing
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.
Special tools, testers and auxiliary items required
- Radio removal tool T10057
- Turn off all electrical components.
- Remove ignition key.
Removing
- Open left luggage compartment storage bin.
- Insert two clips on Radio Removal Tool T10057 into release slits on Navigation/TV Tuner J415 - 2 - until they engage. The points at the grasp eyes show outward.
- Remove Navigation/TV Tuner J415 - 2 - from installation frame - 1 -.
- Release connectors on Navigation/TV Tuner J415 and remove it.
- Remove Radio Release Tool T10057 by pushing locking tabs on Navigation/TV Tuner J415 to do so.
Installing
- Connect all harness connectors.
- Slide Navigation/TV Tuner J415 into installation frame until it engages.
- Perform adaptations and coding on Navigation/TV Tuner J415 if necessary.