Replacing end pipe

WARNING: This page is about a different car, the 2006 Audi A4, 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Replacing End Pipe

Courtesy of VOLKSWAGEN UNITED STATES, INC.

WARNING:

Wear protective glasses.

Using VAG1523 saw, cut end pipe -1- at cutting point -C- at right angle.
Connect end pipe -3- up to marking -A-, so that slot on end pipe lines up with marking -B- on cover.
Tighten mounting bolt of clamp -2- to 25 Nm.