LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (3.0L - Engine Mechanical, Engine Code(S): AVK, BGN) >> 19 Engine - Cooling system >> Cooling system components, removing and installing >> Right coolant line, removing and installing >> Installing

Right coolant line, removing and installing: Installing

WARNING: This page is about a different car, the 2006 Audi A4, 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Installation is reverse of removal, noting the following:

NOTE:
  • Secure all hose connections using hose clamps appropriate for the model type:
  • Replace O-rings.
  • Clean and/or smooth O-ring sealing surface before installing.
  • Coat new O-ring with G12 and slide onto coolant line.
  • Slide coolant line into hole at cylinder block.
  • Install intake manifold. Refer to Installing .
scientia non olet · About LEMON Manuals