Checking internal resistance

WARNING: This page is about a different car, the 2006 Audi A4, 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Valve for camshaft adjustment (intake)

Fig 1: Connecting Multimeter Between Terminals 1 And 2 For Resistance Measurement

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Connect multimeter between terminals 1 and 2 for resistance measurement.

Specification: 7.4 to 8.2 Ω

Valve for camshaft adjustment (exhaust)

Connect multimeter between terminal 2 and 3 for resistance measurement.

Specification: 12.8 to 14.2 Ω

All

If specified value is not obtained:

Replace valve.

If specified value is obtained: