LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (3.0L - Engine Mechanical, Engine Code(S): AVK, BGN) >> 13 Engine - Crankshaft, Cylinder block >> Sealing flanges and flywheel/drive plate, removing and installing >> Flywheel and drive plate, removing and installing >> Drive plate for automatic transmission 01V >> Tightening torques

Tightening torques

WARNING: This page is about a different car, the 2006 Audi A4, 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Component    Nm 
Drive plate to crankshaft  
Bolt length 22.5 mm 60 + 90°1)2)
Bolt length 35.0 mm 60 + 180°2)3)
Sealing plug in cylinder block 25

1) 90° = one quarter-turn

2) Replace bolts.

3) 180° = one half-turn

scientia non olet · About LEMON Manuals