LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (3.0L - Engine Mechanical, Engine Code(S): AVK, BGN) >> 13 Engine - Crankshaft, Cylinder block >> Sealing flanges and flywheel/drive plate, removing and installing >> Damper unit, removing and installing >> Removing

Damper unit, removing and installing: Removing

WARNING: This page is about a different car, the 2006 Audi A4, 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Unscrewing/Screwing Bolts And Removing/Installing Damper Unit From Flywheel
GW00017673Courtesy of VOLKSWAGEN UNITED STATES, INC.
NOTE: For removal and installation of the flywheel -B-. Refer to Flywheel and drive plate, removing and installing .
scientia non olet · About LEMON Manuals