LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (3.0L - Engine Mechanical, Engine Code(S): AVK, BGN) >> 13 Engine - Crankshaft, Cylinder block >> Sealing flanges and flywheel/drive plate, removing and installing >> Damper unit, removing and installing >> Notes

Damper unit, removing and installing: Notes

WARNING: This page is about a different car, the 2006 Audi A4, 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Automatic transmission (CVT) 01J 

With reciprocating engines, torsional vibrations are produced at the crankshaft due to irregularity of the combustion process.

The torsional vibrations are transmitted to the transmission where they cause resonant vibrations. This results in noise and excessive stress on the components.

In 6-cylinder engines the engine torque is transmitted to the transmission via a flywheel damper unit in order to prevent the torsional vibrations from entering the transmission.

scientia non olet · About LEMON Manuals