Right Temperature Flap Motor V159, removing and installing: Notes
WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- This control motor moves two flaps, which are interlinked by way of a connecting rod installed in the air conditioner (not visible from outside) → Coupling element between temperature flaps "1" and "2" . In the event of problems with temperature control, the connection between the flaps can be checked with the air conditioner in position and the heater core removed (for visual inspection, the flap can be viewed through the opening with the heater core removed). To check operation if applicable, reach through slot for heater core into air conditioner and move the flaps via the external lever.