Fresh Air Intake Duct Temperature Sensor G89, removing and installing: Removing

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Remove glove compartment →
- 68 - INTERIOR EQUIPMENT
- 68 - INTERIOR EQUIPMENT for BODY INTERIOR - CABRIOLET
.

Fig 1: Fresh Air Intake Duct Temperature Sensor G89, Removing/Installing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Reach between air conditioner and bottom panel of plenum chamber, grasp hold of temperature sensor - A - and give it an approx. 90° turn in direction of arrow.
Pull temperature sensor - A - out of air conditioner.
Disconnect connector - B -.

NOTE:

If Fresh Air Intake Duct Temperature Sensor G89 cannot be removed:
- Remove dust and pollen filter → Dust and pollen filter element, removing and installing .

Fig 2: Identifying Temperature Sensor

Courtesy of VOLKSWAGEN UNITED STATES, INC.

- Give temperature sensor - A - approx. 90° turn in direction of arrow and remove it from intake housing in direction of passenger compartment.